D-Link xStack DES-6500 User Manual - Stp Bridge Global Settings
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
STP Bridge Global Settings
To open the following window, open the
Spanning Tree
folder in the
Configuration
menu and click the
STP Bridge
Global Settings
link.
Figure 6- 15. STP Bridge Global Settings – STP compatible and RSTP (default)
Figure 6- 16. STP Bridge Global Settings - MSTP
The following parameters can be set:
Parameter Description
STP Status
Use the pull-down menu to enable or disable STP globally on the Switch. The default
is
Disabled
.
STP Version
Use the pull-down menu to choose the desired version of STP to be implemented on
the Switch. There are three choices:
STP
- Select this parameter to set the Spanning Tree Protocol(STP) globally on the
switch.
RSTP
- Select this parameter to set the Rapid Spanning Tree Protocol (RSTP)
globally on the Switch.
MSTP
- Select this parameter to set the Multiple Spanning Tree Protocol (MSTP)
globally on the Switch.
45