D-Link xStack DES-6500 User Manual - Local Enable Password
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Local Enable Password
This window will configure the locally enabled password for the
Enable Admin
command. When a user chooses the
"local_enable" method to promote user level privileges to administrator privileges, he or she will be prompted to enter the
password configured here that is locally set on the Switch.
To view the following window, click
Security Management > Access Authentication Control > Local Enable
Password
:
Figure 7- 22. Configure Local Enable Password window
To set the Local Enable Password, set the following parameters and click
Apply
.
Parameter Description
Old Local Enable
If a password was previously configured for this entry, enter it here in order to
change it to a new password
New Local Enable
Enter the new password that you wish to set on the Switch to authenticate users
attempting to access Administrator Level privileges on the Switch. The user may set
a password of up to 15 characters.
Confirm Local Enable
Confirm the new password entered above. Entering a different password here from
the one set in the New Local Enabled field will result in a fail message.
Click
Apply
to implement changes made.
202