D-Link xStack DGS-3426P User Manual - Ip-Mac Binding Blocked
xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
ARP
– Choosing this selection will set a normal IP-MAC Binding entry for the IP address and
MAC address entered.
ACL
– Choosing this entry will allow only packets from the source IP-MAC binding entry
created here. All other packets with a different IP address will be discarded by the Switch. This
mode can only be used if the ACL Mode has been enabled in the IP-MAC Binding Ports
window as seen previously.
IP-MAC Binding Blocked
To view unauthorized devices that have been blocked by IP-MAC binding restrictions open the
IP-MAC Binding Blocked
window show below. To view this table click,
Administration > IP-MAC-Port Binding >
IP-MAC Binding Blocked
.
Figure 6- 70. IP-MAC Binding Blocked window
To find an unauthorized device that has been blocked by the IP-MAC binding restrictions, enter the
VLAN
name and
MAC
Address
in the appropriate fields and click
Find
. To delete an entry click the delete button next to the entry’s MAC address. To
delete all the entries in the
IP-MAC Binding Blocked Table
click
Delete All
.
96