D-Link xStack DGS-3426P User Manual - Static Arp Settings
xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Static ARP Settings
The Address Resolution Protocol (ARP) is a TCP/IP protocol that converts IP addresses into physical addresses. This table allows
network managers to view, define, modify and delete ARP information for specific devices.
Static entries can be defined in the
ARP Table
. When static entries are defined, a permanent entry is entered and is used to
translate IP address to MAC addresses.
To open the
Static ARP Table
click,
Administration
>
Static ARP Settings
.
Figure 6- 37. Static ARP Settings window
To add a new entry, click the
Add
button, revealing the following screen to configure:
Figure 6- 38. Static ARP Settings – Add window
To modify a current entry, click the corresponding
Modify
button of the entry to be modified, revealing the following screen to
configure:
Figure 6- 39. Static ARP Settings – Edit window
The following fields can be set or viewed:
Parameter Description
IP Address
The IP address of the ARP entry. This field cannot be edited in the Static ARP Settings – Edit
window.
MAC Address
The MAC address of the ARP entry.
After entering the IP Address and MAC Address of the
Static ARP
entry, click
Apply
to implement the new entry. To completely
clear the
Static ARP Settings
, click the
Clear All
button.
72