D-Link xStack DGS-3426P User Manual - Power On
Other manuals for xStack DGS-3426P:
Selection Manual, Specifications, User Manual, Product Manual, Hardware Installation Manual
Manual is about: Product Manual
of
356
xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
Mounting the Switch in a Standard 19" Rack
Figure 2- 18. Installing Switch in a rack
Power On
1.
Plug one end of the AC power cord into the power connector of the Switch and the other end into the local power source
outlet.
2.
After powering on the Switch, the LED indicators will momentarily blink. This blinking of the LED indicators represents
a reset of the system.
Power Failure
As a precaution, in the event of a power failure, unplug the Switch. When power is resumed, plug the Switch back in.
11