Eaglemaster E5 Instruction Manual - Programming 2-Way Remote

Disable remote receiving

You may turn off the 2-Way remote receiving signal from the main unit. Press button 

             simultaneously for 2sec. until one long beep is heard. Remote receiving is now 

disabled.  To turn on receiving again, Press button                simultaneously until two long 

beep is heard, remote receiving is now enable. 

2way remote button  ON/OFF

For safety purpose, this 2-way remote can be lockout the remote button in order not to 

mis-touched the buttons. Press button        for over 2sec. until one beep is heard, remote

button is now locked. To turn on remote button, press button        for over 2sec. until two

beeps is heard, remote button is now unlocked. 

Programming 2-way remote

2-way LCD display : 

2-way LCD display : 

If set with vibration  only

the 2-way LCD will display : 

-9-

Vibrate mode on/off 

Press button        for over 2sec. the 2-way remote will respond  tone & vibrate feature,

the button        pressing 2sec. will change the feature, see under table:

Beeps

2-way remote feature

Vibrations

1-beep

1-beep

1-time

1-time

Remote with tone and vibration

Remote with vibration only

Remote with tone only