Eaglemaster E5 Instruction Manual - page 11
Time adjust mode
Besides operating for alarm functions, LCD remote control additionally provides 12-hour
clock, alarm clock.
Instructions:
1. Press and hold Button for 3sec. to enter time-setup mode, 1 beep will be heard.
2. Press button to select Hour & Min adjust setting. Icon flashing to indicate.
3. Press button to turn up the numbers. Press button to turn down the numbers.
The button may be held down to scroll faster.
4. Press button to exit the setting mode. 2 beep will be heard.
Note: The remote will revert to normal operation from the set mode when 10-seconds has
elapsed without a button entry.
Alarm clock setting
This function useful to warning the user by pre-setting alarm clock time, if setting time up,
the LCD remote will give beep sound for 1 minutes. (Press any button once will stop beep).
Instructions:
1. Press button for 3sec. To enter alarm clock time-setup mode, 1 beep sound will
be heard and alarm clock icon flashing:
2. Press button to select Hour & Min adjust setting. Icon flashing to indicate.
3. Press button to turn up the numbers. Press button to turn down the numbers.
The button may be held down to scroll faster.
4. Press button to enable the alarm clock. 1 beep will be heard and exit the mode.
Press button to disable the alarm clock. 2 beep will be heard and exit the mode.
Note: The remote will revert to normal operation from the set mode when 10-seconds has
elapsed without a button entry.
-10-
AM
AM
PM
PM
Minutes display
12-hour display
AM/PM indicator