Eaton Compass sit-to-stand Installation manual - page 4
4
Compass sit-to-stand
Installation Manual
COMPASS SIT-TO-STAND INSTALLATION MANUAL
Eaton.com/compass
Important Safety Instructions
DANGER Read all instructions before assembling and using this furnishing - Save these instructions
Electrical Ratings
Lift motor controller:
2CHANNEL - 120V AC, 60Hz - 200 W
3CHANNEL - 100V-240V AC, 50Hz-60Hz - 300 W
Desk Capacities
Work Surface Capacity:
Work Surface Travel:
Corner - 375 lbs
Free Stand - 22 1" to 48 25"
Linear - 250 lbs
Integrated - 27 0" to 53 25"
CAUTION
Do not apply loads that exceed the capacity of the console
The applied load includes any items installed or placed onto the
console worksurface or into the base cabinet compartments after
receipt of the console from the carrier Applied loads include (but
are not limited to) monitor poles, electronic equipment, power
distribution units, cabling, Personal Environment System, and
personal items
WARNING
Tipping Hazard Risk for Linear Integrated Style Compass sit-
to-stand Desks
A heavily loaded un-attached linear Compass sit-to-stand desk,
with its work surface in an elevated position, can be unstable
when subjected to a lateral load that exceeds 20 pounds Stability
is further decreased when an organizer wall panel is attached to
desk structure Do not apply in excess of 20 pounds lateral load
to unit
Configuration rules for integrated style Compass sit-to-stand desk:
•
For best stability, Compass linear sit-to-stand desks should be
attached to other adjacent Compass furniture desks
•
When it is not possible
to attach linear sit-to-stand
desk, the maximum
allowable organizer
wall panel height is 20"
Lateral
20 Lb.
Force
Max.
Organizer
wall panel
(max.)
20"
Linear
integrated
Compass
sit-to-
stand desk
Tools required:
The following tools are required to complete the work
described in this manual:
• Cordless screw gun
(recommended)
• Magnetic driver bit holder
(recommended)
• #2 and #3 Phillips driver bits
•
3
/
8
"
hex socket driver bit
•
5
/
32
"
hex allen key
•
7
/
16
"
hex driver bit
• Level
CWXXXXXXXXX
COMPASS
™
Sit to
Stand
Desk
www.eaton.com
5008100
CONFORMS TO UL STD 962
CERTIFIED TO CSA STD C22.2 NO. 68
Safety and Reliability - An Eaton Culture
This product has passed:
UL962 and Canadian Std C22 2 No 68
(Safety Standards)
This product has also passed:
ANSI/BIFMA #2014 5.5
(Reliability Standards)
Compass sit-to-stand Product Configurations
Compass Free Standing and Integrated styles:
Linear: Corner:
1 72" lg x 30" dp
1 72" lg x 30" dp x 72" lg x 30" dp
11 48" lg x 24" dp x 48" lg x 30" dp
2 72" lg x 24" dp
2 72" lg x 24" dp x 72" lg x 24" dp
12 48" lg x 30" dp x 48" lg x 24" dp
3 60" lg x 30" dp
3 72" lg x 24" dp x 72" lg x 30" dp
13 60" lg x 24" dp x 48" lg x 30" dp
4 60" lg x 24" dp
4 72" lg x 30" dp x 72" lg x 24" dp
14 60" lg x 30" dp x 48" lg x 24" dp
5 48" lg x 30" dp
5 60" lg x 30" dp x 60" lg x 30" dp
15 72" lg x 24" dp x 48" lg x 30" dp
6 48" lg x 24" dp
6 60" lg x 24" dp x 60" lg x 24" dp
16 72" lg x 30" dp x 48" lg x 24" dp
7 60" lg x 24" dp x 60" lg x 30" dp
17 48" lg x 30" dp x 72" lg x 30" dp
8 60" lg x 30" dp x 60" lg x 24" dp
18 48" lg x 24" dp x 72" lg x 24" dp
9 48" lg x 30" dp x 48" lg x 30" dp
19 48" lg x 24" dp x 60" lg x 30" dp
10 48" lg x 24" dp x 48" lg x 24" dp
20 48" lg x 30" dp x 60" lg x 24" dp