Eberspächer EasyStart R Installation instructions manual - page 3
3
Scope of supply
1 Mobile
unit
1 Stationary
unit
1 Antenna
1 Pushbutton
1
CR 2430 battery
2
B 3.9 x 19 self-tapping screws for stationary unit
9
MQS socket contacts
1
MQS contact housing, 12 pin
1
Cap with lever for contact housing
Technical specifications
Mobile unit
Frequency: 433.166 MHz
Operating voltage: 3 V (battery)
Dimensions: 70 x 40 x 15.2 mm
Operating temperature: –20 °C to +60 °C
Stationary unit
Frequency: 433.166 MHz
Power supply: 12 V / 24 V
Dimensions: 76 x 76 x 29 mm
Operating temperature: –40 °C to +85 °C
Antenna connection via coded SMB connector.
General information / safety instructions
The mobile unit‘s switching pulses have a range of up
to 1000 metres in an open space (direct visual contact).
External interfering agents such as electronic noise, local
conditions and dense building development of the sur-
rounding area reduce the range.
Choice and arrangement of the antenna has a decisive
infl uence on the range.
The radio remote control can be combined with the
EasyStart T timer.
Introduction
Important!
Observe the safety instructions and general information in
the heater‘s documentation and in the EasyStart R ope-
rating instructions.