Eberspächer EasyStart R Installation instructions manual - page 5
5
Dimensions
Connect antenna
Taking into account the minimum installation level, lay the
antenna cable as high as possible pointing upwards. After
laying the antenna cable, connect it to the stationary unit.
Recommendation:
The antenna should be laid behind the protective rubber
in the A-pillar, in the middle above the front vehicle door.
In most cases, this achieves an optimum range.
165 mm ±3
2000 mm ±40
Remove shielding and
outer insulation
Coaxial cable
RG –174/U
Antenna connector
from the ground
from the ground
at least 1.5 m
at least 1.2 m
Minimum installation level
Installation instructions
Do not change the length of the antenna cable!
Ensure the unshielded end of the antenna cable does not
come into contact with metal and is not completely sur-
rounded with metal or parts containing metal.
Installation example
Laying in the A-pillar under the protective rubber.
Please note!