Eberspächer EasyStart Remote Technical Documentation Manual - 06 : 00
12 | VEHICLE HEATERS – TECHNICAL DOCUMENTATION
3 INITIAL STARTUP
AFTER CONFIRMING Add OR AddE
Setting the time
Use the
or
button to set the hours.
06 : 00
Press the
button to confirm the setting.
Use the
or
button to set the minutes.
06 : 30
Press the
button to confirm the setting.
Setting the weekday
Use the
or
button to set the week-
days.
Mo.
Press the
button to confirm the setting.
The configure the EasyStart Remote+.
TEACH AN ADDITIONAL MOBILE UNIT
Press the button installed in the vehicle until
the button's LED starts to flash. Press the
or
button on the mobile unit;
Add is
displayed.
Confirm Teach mode with the
button.
Pair mode
Add
The additional mobile unit is teached.
CONFIGURING EASYSTART REMOTE+
The system must be configured according to
its use.
PLEASE NOTE!
These installation instructions describe
the standard configuration. For details of
enhanced configuration of the EasyStart
Remote+ and special functions, you can view
and download the “Special Functions and
Diagnosis” installation instructions from
www.eberspaecher-standheizung.com.