Eberspächer EasyStart Remote Technical Documentation Manual - page 4
4 | VEHICLE HEATERS – TECHNICAL DOCUMENTATION
PLEASE READ FIRST
Before you start to install the radio remote
control, please ensure you read through these
installation instructions carefully.
These installation instructions contain impor-
tant information, which you need to install the
radio remote control.
GENERAL INFORMATION / SAFETY
INSTRUCTIONS
The pulses of the mobile unit have a range of
up to 1000 metres outdoors (direct visual con-
tact). External interference, local conditions
and high building density in the surrounding
area shorten the range.
The choice and positioning of the antenna
have a decisive effect on the range.
The room temperature sensor must be con-
nected to use the full functional scope of the
radio remote control.
The room temperature sensor supplied must
be connected, otherwise the temperature can-
not be displayed in the mobile unit's display
and automatic operating time calculation is
not possible.
1 INTRODUCTION
DANGER!
Only the battery cover of the mobile unit
may be opened.
The battery and battery cover must be kept
out of reach of children – swallowed small
parts.
Before washing clothing, remove the mobile
unit from pocket.
Protect the mobile unit from adverse
effects (impacts, extreme temperatures,
moisture, rain, liquids).
The mobile unit and heater must be
switched off when refuelling.
Dispose of the battery and mobile unit
according to the statutory regulations.
Only use the recommended battery and
original spare parts.
All information and notes, in particular the
safety instructions in the heater’s technical
description and in the EasyStart Remote+
operating instructions must be observed at
all times!