Eberspächer EasyStart Remote Technical Documentation Manual - 10:30
VEHICLE HEATERS – TECHNICAL DOCUMENTATION | 13
OPENING THE VEHICLE WORKSHOP MENU
Display ON, the Start display appears.
Use the
or
button to select the
symbol in the Menu bar.
10:30
Mo.
Confirm the SETTINGS menu item by pressing
the
button.
The SET THE TIME symbol is displayed
flashing.
Press the
LONGPRESS button for longer
than 5 sec.; the Workshop menu is displayed.
SELECTING THE SETTINGS FOR THE STAND-
ARD CONFIGURATION
SELECTING THE TEMPERATURE UNITS –
ITEM 2:
Default: °C
Use the
or
button to select Item 2:
and confirm by pressing the
button.
Use the
or
button to select the tem-
perature units °C or °F.
2: 18 °C
SERVICE
2: 64.4 °F
SERVICE
Press the
button to confirm the selection.
RESETTING TO AS-DELIVERED CONDITION –
ITEM 5:
Use the
or
button to select Item 5:
and confirm by pressing the
button.
5: Default
SERVICE
Press the
button to confirm the selection.
INIT
Following the automatic detection the cur-
rent time and the current weekday must be
entered, then the Start display appears. (
see
page 12
).
3 INITIAL STARTUP