Eberspächer EasyStart Remote Technical Documentation Manual - page 18
18 | VEHICLE HEATERS – TECHNICAL DOCUMENTATION
4 WHAT TO DO IF …?
DISPLAY
DESCRIPTION
REMEDY
Distance between the mobile unit
and vehicle too large or at the
range limit.
Change the position relative to
the vehicle e.g. hold mobile unit
higher or move it to the side.
Reduce distance from vehicle.
Dense buildings between the
mobile unit and vehicle.
Reduce distance. If possible,
reinstate visual contact with the
vehicle.
Mobile unit has not been taught.
Teach mobile unit as described in
the installation instruction.
Several EasyStart Remote+ radio
remote controls are operated
simultaneously.
Reactivate the mobile unit after
a pause.
DESCRIPTION
POSSIBLE CAUSE
REMEDY
The mobile unit can-
not be activated
Battery dead.
Replace battery.
No battery inserted.
Insert battery.
Battery inserted incorrectly.
Insert battery correctly.
LED indicator of the
button is flashing
Stationary unit is in teach mode.
The indicator goes out auto-
matically after 30 seconds.
Teach mobile unit as
described in the installation
instructions.