Eberspächer EasyStart Remote Technical Documentation Manual - 10: Off
VEHICLE HEATERS – TECHNICAL DOCUMENTATION | 15
3 INITIAL STARTUP
SELECT DEPARTURE TIME OR START TIME –
ITEM 10:
Default: “Off” for departure time
Use the
or
button to select Item 10:
and confirm by pressing the
button.
Use the
or
“Off” button for the
departure time or “On” to select the start
time.
10: Off
SERVICE
Departure time
10: On
SERVICE
Start time
Press the
button to confirm the selection.
PLEASE NOTE!
The start time can only be activated if the
operating time calculation Item 11.1: is set
to “Off”.
After confirming you must reset the system by
removing the 5A fuse.
ACTIVATING OR DEACTIVATING AUTOMATIC
OPERATING TIME CALCULATION FOR WATER
HEATERS – ITEM 11.1:
Default: “Off”
Use the
or
button to select Item
11.1: and confirm by pressing the
button.
Use the
or
button to select “Off” or
“On”.
11.1: Off
SERVICE
11.1: On
SERVICE
Press the
button to confirm the selection.
PLEASE NOTE!
On activating the operating time calculation
the departure time is activated automatically
in Item 10.
Automatic operating time calculation is
not possible for air heaters; if Item 11.1: is
selected the following appears in the display:
11.1: --
SERVICE
After confirming you must reset the system by
removing the 5A fuse.