EZDRY EPD60W Instruction Manual - page 4

4

1. Place the base on a counter top or other suitable firm surface. Plug the unit into a 

proper wall outlet. Be certain that the outlet voltage corresponds with the voltage 

marked on the base.

2. Prepare the food, according to its type, as indicated in the drying charts on the 

following pages.

3. Preheat  the  dehydrator  by  turning  it  on  5-10  minutes  before  loading  the  first  tray. 

temperature will rise to approximately 155-165°F.

4. Arrange food to dry on each of the trays. Remember that it is the hot air circulation 

that dries the food; do not overload the trays and never overlap the food. stack trays 

with prepared food and place on the base platform. Place the cover in position on 

the top tray.  

5. Dry for the time period suggested on the charts. Check food frequently (every 1/2 

hour) near the end of the drying time and remove individual pieces as they become 

dry. When foods are all the same size and thickness, they will dry evenly and at the 

same rate.

1. Prior to cleaning, always unplug the unit from the wall outlet.

2. to clean the trays and cover, wash them in warm water and soap. Do not use a 

scouring pad or any abrasive cleaners. the trays and cover, can be safely washed 

in the top rack of the dishwasher.

3. Wipe the base clean with a damp cloth. Do not immerse in water.

HoW to oPeRAte YoUR DeHYDRAtoR

HoW to CLeAn YoUR DeHYDRAtoR