Falcon Elan 90 Ceramic User Manual & Installation & Service Instructions - page 10
U109655 10
Australia
To turn off the key lock
Turn and hold the Timer knob to the clock symbol (
) for
about 8 seconds. ‘OF’ will appear on the display.
Keep holding the Timer knob turned to the clock symbol
(
) and turn the Adjusting knob clockwise until the key
symbol ( ) goes out on the display and ‘On’ shows. Let go
of the knobs.
After a few seconds, the display reverts to showing the
time of day:
The ovens can now be used normally again.
Multi-function oven functions
The Multi-function oven has many varied uses. We
suggest you keep a careful eye on your cooking until
you are familiar with each function. Remember - not all
functions will be suitable for all food types.
The ‘stop time’ is displayed, followed by 'AUTO'. Set the
oven(s) to the cooking temperature you need. Turn the
Timer knob to the AUTO setting.
When your cooking has finished, the beeper sounds. Turn
the Timer knob to the vertical ( ) to return to manual
cooking. If you are out, don’t worry about the beeper
going off - it stops on its own after a while. When you
return, turn the Timer knob to the vertical ( ) to revert to
manual cooking.
AUTO is showing, but you want to revert to manual
cooking
You can cancel any automatic settings by briefly turning
the Timer knob to the clock symbol (
) and then
releasing it.
Key Lock
When the key lock is activated, the ovens are locked and
will not come on.
To activate the key lock
Make sure that the clock is in manual mode and cancel
any active programs. Turn and hold the Timer knob to the
clock symbol (
) for about 8 seconds. ‘On’ appears on the
display:
Keep holding the Timer knob turned to the clock symbol
(
) and turn the Adjusting knob clockwise until the key
symbol ( ) and ‘OF’ shows on the display. Let go of the
knobs.
The ovens are now locked, as is confirmed by the display
showing the time of day alongside the key symbol.