Falcon Elan 90 Ceramic User Manual & Installation & Service Instructions - page 19
19 U109655
INSTALLATION
Check that the appliance is electrically safe when you have finished.
Australia
Installation
Dear Installer
Before you start your installation, please complete the
details below, so that, if your customer has a problem
relating to your installation, they will be able to contact
you easily.
Installer’s Name
Installer’s Company
Installer’s Telephone number
Safety Requirements
The cooker must be installed, in a well ventilated space,
in accordance with the subsequent section entitled
Electrical Connection.
Read these instructions before installing or using the
appliance.
Provision of Ventilation
This appliance is not connected to a combustion products
evacuation device. Therefore, particular attention must
be given to the relevant local requirements regarding
ventilation.
All rooms require a window that can be opened, or
equivalent, while some rooms require a permanent vent
in addition to the window.
Location of Cooker
The cooker may be installed in a kitchen/kitchen diner but
NOT in a room containing a bath or shower.
This appliance is designed for domestic cooking
only. Use for any other purpose could invalidate any
warranty or liability claim.
You will need the following items to complete the cooker
installation satisfactorily:
•
Multimeter
(for electrical checks)
•
Cooker levelling tool with Allen keys
(provided in pack)
You will also need the following tools:
1.
Electric drill
2. Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3. Rawlplugs (only required if fitting the cooker on a stone or
concrete floor)
4. Steel tape measure
5. Cross-head screwdriver
6. Flat-bladed screwdriver
7. Spirit level
8. Pencil
9. Adjustable spanner
Checking the parts (other than the levelling tool and Allen
keys shown above)
One flat oven shelf and one
drop shelf
Tall oven shelves and shelf
supports.
Handyrack
Roasting tin
Grill pan and trivet
Splashback and Plinth