Falcon Elan 90 Ceramic User Manual & Installation & Service Instructions - page 9
9 U109655
Australia
The Clock
Setting the time of day
A Timer knob
B Adjusting knob
When the clock is first connected, the display flashes
(
) and (
) alternately.
To set the time, turn and hold the Timer knob to the clock
symbol (
) and at the same time turn the Adjusting
knob left or right until the clock shows the time of day.
Remember: this is a 24-hour clock. Let go of the Timer
knob and it will spring back to the vertical, oven manual
setting.
The following sections show you how to use the
various clock functions, which apply to both
ovens simultaneously. If both ovens are cooking
automatically using the timer, you can control them
individually using the different oven temperature
knobs.
Minute Minder
This function acts as a reminder, setting a beeper to sound
after a set number of minutes. Turn the Timer knob to the
right to the ( ) minute minder setting - it should click
into position:
Use the Adjusting knob to set the time you need as below:
You can either turn the knob back to the vertical manual
setting ( ) to keep an eye on the time of day, or leave it in
the ( ) minute minder position as the time ticks down. To
stop the beeper when it sounds, turn the Adjusting knob
anticlockwise.
To stop the ovens at a specific time of
day
Turn the Timer knob to the (
) position.
Use the Adjusting knob to set the time at which the oven
is to stop. You can set the oven to turn on at any time over
the following 24-hour period. AUTO shows in the display:
Turn the Timer knob to the bottom AUTO setting. Once
the set time is reached, the beeper sounds. Turn the Timer
knob to the vertical ( ) to return to manual cooking.
To start and then stop the ovens using
the Timer
Before
you set the clock, decide on both the ‘cook time’,
which is the period of time you want the oven to cook,
and the ‘stop time’, which is the time of day at which
you want the ovens to stop cooking. You cannot set
a start time directly - this is set automatically by a
combination of the 'cook time' and 'stop time'.
Turn the Timer knob to the (
) position:
Use the Adjusting knob to set the ‘cook time’ you need:
Turn the Timer knob to the (
) position. The display will
show the current time of day plus the ‘cook time’ you just
set. Use the Adjusting knob to set the ‘stop time’ you need: