Fellini 13-04522 Owner's Manual - Remote Control
HOW TO OPERATE THE REMOTE CONTROL
•
This air conditioner has a built-in microcomputer memory that will save all set data ; when
pressing ON/OFF to start the unit, operations set before the shut off will resume.
S
ETTING THE REMOTE CLOCK
Before operating the remote control, it is important to check and set the remote clock.
Initial setting (after inserting new batteries:
Once the batteries are in the remote control, the remote clock panel will display 12:00.
1.
Press and hold the CLOCK button for 3 seconds - the time begins to flash .
2.
Press on the setting keys or to set the current time.
3.
Once the right time is set, release the buttons and press the CLOCK button again or wait 5
seconds - the clock time stops flashing, meaning that the current time is now set.
Resetting the clock :
1.
Press and hold the CLOCK button for 3 seconds - the time begins to flash .
2.
Follow steps 2 and 3 detailed above.
• Each time you press one of the setting keys, the time moves forward or backward by 1min.
Keep pressing without releasing, it moves by 10 minutes.
• Set the CLOCK time before activating the timer. If you adjust the clock time after setting the
timer, it will accordingly impact on the time you have set on the timer.
•
Static electricity, battery power failure or other factors can cause the remote control clock to
initialize. If the remote is initialized (
flashing 12:00
), reset the clock before starting operation.
• The remote display shows the current time only when the TIMER function is off. If the TIMER
is on, press on CLOCK
to show the current time.
S
TARTING
O
PERATION
:
Press the ON/OFF key to start - matching icon shows ;
push again to stop.
• T
RANSMISSION
I
NDICATOR
:
lights when the remote control transmits signals to the unit.
T
O SELECT THE MODE
Press the MODE
button and set to the desired mode indicated by each matching icon :
AUTO
COOL
DRY*
HEAT*
FAN .
*Important : DRY and HEAT modes are not functional on COOL only models.
T
O SELECT THE FAN SPEED
Press the FAN button and set to the desired level indicated by
each matching speed icon :
AUTO
LOW
MED
HIGH
•
Fan speed cannot be adjusted in AUTO or DRY* mode.
• DRY mode is not functional on COOL only models.
E
NERGY SAVER MODE
This feature can be activated in COOL only mode. Press on ENERGY SAVER to set.
12