Fellini 13-04522 Owner's Manual - Remote Control
13
REMOTE CONTROL
S
ETTING THE TEMPERATURE
:
Press
or
to set temperature - it will show on the remote Set Temp display .
When pressing and holding the keys together for 3 sec., display alternates between
o
C
and
o
F
.
• Temperature cannot be set and does not show in FAN only mode.
S
ETTING THE TIMER
:
•
When setting the timer time, from 0 to 10 hours, numbers will increase by 1/2 hour ;
from 10 to 24 hours, it will increase by 1 hour.
• The time is registered within a 3 seconds period ; do not stop pressing the button until
desired time is set ; otherwise, you must start from beginning.
Automatic start time :
1.
Press the TIMER
button and set to ON as indicated by the matching icon on the
LED remote display ; the setting time right beside is flashing .
2.
Press
or
to set the numbers of hours (1-24) before the unit TURNS ON.
3.
Wait for 3 seconds and the set time will stop flashing - the TIMER ON is now activated.
Automatic shut off :
1.
Press the TIMER
button and set to OFF indicated by the matching icon on the LED
remote display ; the setting time right beside is flashing .
2.
Press
or
to set the numbers of hours (1-24) before the unit TURNS OFF.
3.
Wait for 3 seconds and the set time will stop flashing - the timer OFF is now activated.
Combined automatic start and shut off :
You can program at the same time an automatic start and a shut off. Follow same
procedures as above for both start and shut off. This feature is usefuL, for ex. when you want
to stop the air conditioner after you leave home, and turn it on before your return.
Cancelling the timer :
• To cancel the TIMER ON and TIMER OFF, simply press on the CANCEL button .
S
ETTING THE SLEEP MODE
Press on SLEEP
to set - the matching icon will show ; to cancel, press again on SLEEP.
L
OCK
:
When you press the LOCK buton, this matching icon is displayed and all
current settings are locked in - no other settings can be entered ; press again to cancel.
R
ESET
:
When pressing the recessed RESET button, all current settings are cancelled and
the control will return to the initial settings.
LED :
Press to clear the air conditioner digital display ; press again to activate it.
“F
OLLOW ME
”
FEATURE
(
NOT AVAILABLE ON COOL ONLY MODELS
)
• Press on FOLLOW ME
; - this matching icon will show ; press again to cancel.