Fender MUSTANG FLOOR Advanced Owner's Manual - page 2
M U S T A N G
™
F L O O R
Contents
Getting Started! 2
Data Wheel 2
Footswitch Modes 3
Tap/Tuner 3
Amplifier Menus 4
Effects Menus 4
Expression Pedal 5
EXP-1 and MS-4 6
Saving Presets 7
Utility Menus 7
Output Jacks 8
Aux/Phone Jacks 8
Insert Loop 9
USB Port 9
MIDI 9
Factory Restore & Firmware Update 9
FAQ 9
MIDI Appendix 10
Getting Started!
USB
EXP-1/
MS-4
GROUND
LIFT
PHONES
AUX IN
XLR OUT
LEVEL
UNBALANCED OUT
MIDI
R
L
R
L
OUT
IN
INSERT LOOP
INPUT
POWER
SEND
RETURN
I
0
1
3
4
5
2
The basic Mustang™ Floor setup:
1.
Plugthesuppliedpoweradapterintoagroundedoutlet.
2.
PressthePOWERswitchtothe"1"positiontoturntheMustang
Flooron.
3.
PlugyourguitarintotheINPUTjack.
4.
ConnecttheinputofyourguitaramplifierorPAsystemtothe
LUNBALANCEDOUTjack–OR–plugyourheadphonesintothe
PHONESjack.
5.
TurntheLEVELknobtoatleasthalfwayup.
The LEVEL knob controls the output level of all the analog
outputs on the Mustang Floor, including the UNBALANCED
OUT jacks, the XLR OUT jacks and the PHONES jack.
6.
TurnonyourPAsystemorguitaramplifier–OR–putonyour
headphonesandstartexploringtheMustangFloor!
7.
Be sure to power off your amplifier (or PA) before powering
downtheMustangFloor.
The Mustang Floor is fully integrated with Fender® FUSE™
software which allows you to configure and operate the
Mustang Floor with ease from your computer. You can use
Fender FUSE to download free presets from Fender artists;
backup and restore presets for different occasions; and
customize the Mustang Floor in ways not available from the
Mustang Floor alone. Please download the latest version of
Fender FUSE, free of charge from
fuse.fender.com
.
Data Wheel
TurnthebigDATAWHEELtoselectpresetsinplaymode
(presstheEXITbutton,iflit,toreturntoplaymode):
PresstheDATAWHEELtoseebasicinformationaboutthecurrent
preset, such as the current amplifier model and the effects
assignedundereachofthefoureffectcategories:
PEDAL
PEDAL
Push to view the Preset Information screen
PresstheDATAWHEELasecondtimetoseewhereeacheffectis
locatedintheguitarsignalprocessingpath:
PEDAL
PEDAL
Push twice to view the Signal Path screen
x2
You can change the order of effects in the signal path to create
unique sounds using Fender FUSE software.
TheDATAWHEELhasmanyfunctions!Enterany
edit mode by pressing one of the buttons below
thescreenandtheDATAWHEELisusedtonavigate
and edit in the menu currently being displayed.
Dependingonthemenu,youwillpressorturnthe
DATA WHEEL to select items and adjust settings,
asdescribedinthismanualandshownonscreen.
UsingtheDATAWHEELisintuitive,butifyouever
getlost,justpressEXITtoreturntoplaymode.
2