Fender MUSTANG FLOOR Advanced Owner's Manual - page 5
M U S T A N G
™
F L O O R
3.
PresstheDATAWHEELoneormoretimesuntilthesettingthat
youwanttoadjustishighlighted,thenturntheDATAWHEEL
toadjustthesetting.
You can also hold down an Effect button and turn the DATA
WHEEL to scroll through settings faster!
Press the DATA WHEEL repeatedly
to select the next Effect setting
4.
PressEXITtoreturntoplaymode.
You can bypass an effect at any time, even while you are in
the effect settings menus, by pressing the Effect button, or
corresponding footswitch button (when in FX SELECT mode).
Expression Pedal
Your Mustang™ Floor is equipped with a dual-mode expression
pedal. Switch between Volume mode and Expression mode by
pressing down hard on the toe end of the pedal. An icon in the
upperrightcornerofthescreendisplaysthecurrentpedalmode.
"VOLUME OFF" or "EXP OFF" appears if the current pedal mode
is set to "off" for the current preset in the Volume Enable or
ExpressionBehaviorpedalmenusbelow.
Volume mode icon
Expression mode icon
Volumemodeisusedtocontrolmastervolume(orthepedal
canbesettooffinVolumemode).
Expressionmodecanbeusedtocontrolalmostanyeffector
ampparameterontheMustangFloor(orthepedalcanbeset
tooffinExpressionmode).Somecommonusesaretocontrol
the frequency parameter of a Wah effect or the rate/time
parameterofamodulationordelayeffect.
Pedal Menus
PressthePEDALbuttontoconfiguretheMustangFloor
expressionpedalaswellasanexternalEXP-1expression
pedal (optional) when connected. Press the PEDAL
button repeatedly to access each of the pedal menus described
below.Manymenuitemsaredynamicandonlyappearunderthe
appropriateconditions.Forexample,ifExpressionBehaviormode
issetto"off,"noneoftheparametermenusforExpressionmode
willappear.Likewise,allEXP-1pedalparameterswillappearonly
when an EXP-1 pedal is connected to the Mustang Floor. Note:
EXP-1menuitemsareprefacedwith"EXP-1"insteadof"FLOOR"on
screen.
The current Volume or Expression mode state of the pedal
is stored with the current preset when you save a preset. See
"Pedal Default" under Utility Menus on page 7 to override.
VOLUME MODE MENUS
• Volume Enable — (On/Off) Select "On" if you want the pedal to
controlthemastervolumelevelinVolumemode,orselect"Off"if
youwantthepedaltobeoffinVolumemode.
• Global Volume Heel / Global Volume Toe — (0–100%) Use
thesemenustosetthemastervolumelevelwiththeheelofthe
pedalinthefullydownposition(HeelVolume)andwiththetoe
ofthepedalinthefullydownposition(ToeVolume).
The Global Volume Heel and Toe settings are stored globally
and affect all presets. Every other pedal parameter is stored
locally and affects an individual preset.
EXPRESSION MODE MENUS
• Expression Behavior — (Off, Amp, Stomp, Mod, Delay, Reverb, Volume)
Selectthecategorythatyouwanttocontrolwiththeexpression
pedalinExpressionmodeorselect"Off"ifyouwantthepedalto
beoffinExpressionmode.
You must have an effect selected for the current preset on
the Mustang Floor to make that category of effect become
available for selection in this menu.
• Expression Parameter — (Variable) Select the parameter that
you want to control with the pedal in Expression mode. Your
options will change depending on the category you selected
in the Expression Behavior menu above, and the effect module
selectedforthecurrentpreset.
• Expression Heel / Expression Toe — (Variable)Usethesemenus
tosettheleveloftheactiveparameterwiththeheelofthepedal
in the fully down position (Heel Setting) and with the toe of
thepedalinthefullydownposition(ToeSetting).Youroptions
will change depending on the category you selected in the
ExpressionBehaviormenu,above.
• Expression Mode — (Capture, Live) If "Live" is selected, the cur-
rent pedal position will override the stored preset setting for
the assigned expression pedal parameter when a preset is first
selected.If"Capture"isselected,thepedalisdisableduntilyou
movethepedalafterapresethasbeenselected.
5