Fender MUSTANG FLOOR Advanced Owner's Manual - page 3
M U S T A N G
™
F L O O R
Footswitch Modes
PresstheMODEbuttontoswitchbetweenPRESETand
FXSELECTmodes:
PRESET Mode
PUSH
HOLD TO EDIT
STOMP
INSERT
MOD
DELAY
REVERB
TAP/TUNER
1
UP
2
3
4
5
BANK
M U S TA N G
F L O O R
TM
MODE
PRESET / FX SELECT
EXIT
PEDAL
SAVE
UTIL
REVERB
DELAY
MOD
STOMP
AMP
In PRESET mode the green LED lights up and the
bottomfivefootswitchbuttons(0•5,1•6,2•7,3•8,4•9)
are used to select presets from the current bank of
fivepresets.PresstheBANK/PRESETbuttonstoselect
differentbanksoffivepresetstochoosefrom,then
press one of the numbered footswitch buttons to
selectapresetfromthebankasdisplayedonscreen.
M U S TA N G
F L O O R
TM
STOMP
INSERT
MOD
DELAY
REVERB
TAP/TUNER
MODE
PRESET / FX SELECT
BANK / PRESET
0• 5
2• 7
3• 8
4• 9
1• 6
Select Presets from the current Bank
Select Preset Banks
FX SELECT Mode
PUSH
HOLD TO EDIT
STOMP
INSERT
MOD
DELAY
REVERB
TAP/TUNER
1
UP
2
3
4
5
BANK
M U S TA N G
F L O O R
TM
EXIT
PEDAL
SAVE
UTIL
REVERB
DELAY
MOD
STOMP
AMP
MODE
PRESET / FX SELECT
In FX SELECT mode the red LED lights up and the
bottom five footswitch buttons (INSERT, STOMP,
MOD, DELAY, REVERB) are used to select/bypass
effects for the current preset (the INSERT button
selects/bypasses external effects connected to the
INSERTLOOPjacks).PresstheBANK/PRESETbuttons
toselectpresetsupor down,oneatatime.
M U S TA N G
F L O O R
TM
STOMP
INSERT
MOD
DELAY
REVERB
TAP/TUNER
MODE
PRESET / FX SELECT
BANK / PRESET
0• 5
2• 7
3• 8
4• 9
1• 6
Select / bypass Effects
Select Presets
Each FX Select footswitch button will function only when an
effect is assigned to that category for the current preset. See
Effect Menus on page 4 to choose effects.
Tap / Tuner
TAP/TUNER
UsetheTAP/TUNERbuttonto:
•Tapindelaytimeormodulationrateeffectsettings
•Activatetheon-boardguitartuner
TAP Button
Wheneitheradelayormodulationeffectisactive,theLEDnextto
theTAP/TUNERbuttonwillblinkinsyncwiththeeffecttime/rate
setting(modulationratescanhaveupto12secondintervalsand
the LED may blink infrequently). If both a delay and modulation
effectareactivesimultaneously,theLEDwillblinkinsyncwiththe
delayeffectandtheTAP/TUNERbuttonwillonlycontrolthedelay
time setting (you can bypass the delay effect temporarily if you
wanttousetheTAP/TUNERbuttontosetthemodulationrate).
You can use the effect settings menus or Fender FUSE to set
delay time and modulation rates more precisely.
Using TAP to set effect time/rate settings:
1.
SelectadelayormodulationeffectthatcausestheTAP/TUNER
LED to blink, using the effects menus (see "Selecting Effects"
underEffectsMenus,page 4).
2.
Press the TAP/TUNER button rhythmically (twice minimum)
in time with the desired interval. If you press the TAP/TUNER
button only once, the interval will be set to the maximum
value. You can see the maximum/minimum values for the
currenteffectintheeffectsettingsmenu(seepage5).
Watch the actual time/rate TAP values change while you are
tapping them in, by opening the effect settings menu!
TUNER Button
The Mustang™ Floor has a built-in Tuner mode that displays a
chromaticguitartuneronscreen.
To use the Tuner:
1.
Press and hold the TAP/TUNER button until the Tuner screen
appears.
2
Strike any single string on your guitar and watch the screen.
The note of the string being tuned is displayed along with a
finetuningneedle:
3.
Turnthetuningpegonyourguitaruntilthefinetuningneedle
indicatesthestringisintune,asshownabove.
4.
PressEXITorTAP/TUNERtoexitfromtheTuner.
3