Fender MUSTANG FLOOR Advanced Owner's Manual - page 9
M U S T A N G
™
F L O O R
Phones Jack
USB
EXP-1/
MS-4
GROUND
LIFT
PHONES
AUX IN
XLR OUT
LEVEL
UNBALANCED OUT
MIDI
R
L
R
L
OUT
IN
INSERT LOOP
INPUT
POWER
SEND
RETURN
I
0
Pluginyourheadphones,earbuds,orpoweredspeakers
to enjoy the Mustang Floor's stereo features. This jack
may also be used as a stereo recording output. The
output voicing is automatically set to "PA SYSTEM" while the
PHONES jack is used, internally overriding the output voicing
setting in the utility menu. Use the LEVEL knob to adjust the
outputlevel.
A headphones icon
will appear on screen when the
PHONES jack is in use.
Insert Loop
USB
EXP-1/
MS-4
GROUND
LIFT
PHONES
AUX IN
XLR OUT
LEVEL
UNBALANCED OUT
MIDI
R
L
R
L
OUT
IN
INSERT LOOP
INPUT
POWER
SEND
RETURN
I
0
Connect external effects devices to the
Mustang Floor using the SEND and RETURN
jacks. Connect SEND to the input on your
external effects device and connect RETURN
totheoutputonyoureffectsdevice.Theon/offstateoftheinsert
loopisstoredaspartofeachpreset.
You can bypass the external effects that you have connected
through the INSERT LOOP by pressing the INSERT footswitch
button on the Mustang Floor when in FX SELECT mode.
USB Port
USB
EXP-1/
MS-4
GROUND
LIFT
PHONES
AUX IN
XLR OUT
LEVEL
UNBALANCED OUT
MIDI
R
L
R
L
OUT
IN
INSERT LOOP
INPUT
POWER
SEND
RETURN
I
0
Use the USB port to connect the Mustang™ Floor to your
computerandtakeyourmusictothenextlevel:
•Use Fender® FUSE™ software to control the Mustang Floor
fromyourcomputerandaccessbonusfeaturesnotavailable
fromtheMustangFlooralone!
Please download the Fender FUSE owner's manual from
fuse.
fender.com
for system requirements.
•Record and edit Mustang Floor digital audio using your
favoriterecordingsoftware.
MIDI
USB
EXP-1/
MS-4
GROUND
LIFT
PHONES
AUX IN
XLR OUT
LEVEL
UNBALANCED OUT
MIDI
R
L
R
L
OUT
IN
INSERT LOOP
INPUT
POWER
SEND
RETURN
I
0
TheMustang FloorisMIDI(MusicalInstrument
Digital Interface) compatible. Use the utility
menus(seeUtilityMenus,page7)toconfigure
MIDI channel settings and select Continuous
Controllernumbers(CC#)foroutgoingexpressionpedalevents.
IncomingMIDIProgramChanges0-99areusedtoselectMustang
Floorpresets0-99.IncomingMIDIContinuousControllersareused
toadjustMustangFloorparametersaslistedintheMIDIAppendix
startingonpage10.
Factory Restore &
Firmware Update
Factory Restore
YoucanrestoreyourMustangFloortotheoriginalfactorysettings
ifdesired.Alluserpresetswillbeerased!
To restore the Mustang Floor to factory settings:
1.
Turntheunitoff.
2.
Press and hold the EXIT button while turning the unit back
on. Continue holding the EXIT button until it is no longer
illuminated.
!
The FACTORY RESTORE function will erase all user modified
presets. It will also remove any custom effect selections that
have been modified using Fender FUSE software.
Firmware Update
Fromtimetotime,Fendermaymakeavailablefirmwareupdates
for your Mustang Floor to improve operation or to add new
features. To update the firmware on your unit you will need to
connectitthroughtheUSBporttoacomputerwithFenderFUSE
softwareandaninternetconnection.
Please see the Fender FUSE manual at
fuse.fender.com
for
details.
FAQ
Thereareseveralgreatplacesyoucangotolearnmoreaboutyour
MustangFloor:
•
www.fender.com/support
•JoinaFenderCommunityforumwhereyoucanaskquestions
andreadthreads.There'sevenaforumjustfortheMustang:
www.fender.com/community/forums
•Log on to the Fender Knowledge Base to download and
read "Frequently Asked Questions" (FAQ):
www.fender.com/
community/forums/faq.php
9