Fernbedienung CV1000 User Manual - Macro Notes :
- 56 -
6. Display will show the Macro Key Setup Screen.
This screen comprises the current screen labels
for that Mode plus the SETUP and MACRO LCD
labels will be shown. Press and release the
remote keys (maximum of 20) that are required
to be stored in the exact order that they should
be transmitted. Use the LCD “SCREEN” key to
toggle the screen keys displayed and use the
Mode keys for any Mode changes. The Setup
key can be used to add delays – see separate
notes. These are all counted as keystrokes.
7. To store the Macro, press and release the rubber
“MACRO” Key. Display will return to the Main
Setup Screen. Note - if you program the
maximum of 20 keys, then the Macro will be
automatically stored on the 20
th
keypress.
8. Macro key programming now completed. Press and release the LCD
“EXIT” key to return to normal operation.
Macro Notes :
1. “SHIFTED” key commands are not allowed to be included in Macros.
2. There is an automatic delay of 0.5 second between each IR
transmission in the sequence.
3. It may be necessary to have “delays” included in the Macro sequence
(e.g. to allow your TV warm-up time). Pressing the Setup key can
include delays. The display will show the Macro Delay Setup Screen
for digit selection. Press the digit for the required delay (in seconds)
e.g. to enter a delay of 4 seconds, press and release Setup followed by
4. The maximum delay is 9 seconds. An “EXIT” key entry will give the
default 0.5second delay. A delay is counted as one keystroke.
4. Pressing the Setup key twice allows for the User to abort and exit the
Macro routine. First Setup keypress takes you to the “Delay” screen
and the second Setup press results in abort and exit.
Setup Screen - Macro2
SEARCH
SETUP
EXIT
SV/V+
MENU
SCREEN
KEY?
OK
0
7
9
4
6
2
8
5
3
S
LEVEL
MACRO
DSP
EFFECT
LEARN
VCR
TV
DVD
STB
TUNER
TAPE
CD
AUDIO
DISC
USER1
USER2
CODE
MODE
A B
REPEAT
ENTER
FAV
T-C
SLEEP
10
P
GUIDE
i
AV
AUX