Fernbedienung CV1000 User Manual - 6. All Power Off Feature :
- 68 -
4. Channel Scan/Search Key (LCD) :
The Channel Scan/Search function is only available in TV, DVD, CBL/SAT
and CD/Audio Modes. Pressing the LCD “SEARCH” Key allows the User
to sequentially scan up available program channels. This key cannot be
learned.
When pressed, a Channel Up command for the Current Mode code is sent
once every 3 seconds. When any other key is pressed the scan will stop.
Scanning will automatically time-out after 2 minutes if no key is pressed.
5. VideoPlus/Showview Key (LCD) :
This key allows the User to directly access their VCR VideoPlus or
Showview function if the feature is available on their VCR. If VideoPlus or
Showview feature is not available then this key will allow direct access to
any VCR Timer or Menu operation (if present) as an alternative. The
VideoPlus/Showview function is only available in VCR programmed
Modes. This key can be learned if required.
6. All Power Off Feature :
If the Power key is pressed consecutively twice within a 1second period,
and the second Power key-press is held for greater than 2 seconds, then
the remote will send the Power command for all Modes.
7. TV Volume/Mute Punch-Through :
The TV Volume/Mute punch-through feature allows the User to control the
Volume and Mute function of their Television in any Mode programmed to
be a VCR (inc. DVD), Cable or SAT library device without the need to
change to TV Mode. This feature is also available if AUX Mode is
programmed to control a second VCR, Cable or SAT device.