Fernbedienung CV1000 User Manual - 13) Code Learning :

- 62 - 

13) Code Learning : 

It is possible to learn IR commands (up to 40 keys per Mode) from your 

original remote. 

Tips On Learning : 

1.  Always use of fresh batteries for the CV1000 and original remote  

2.  Carry out a Master Reset before attempting any Learning. Note this will 

reset all User programming back to factory defaults. 

3.  Place the original remote to the base of the Touchscreen so the IR LED 

on the original remote is in line with the Touchscreen opto-diode input 

(See graphic below). 

4.  Keep the distance between the two remotes to about 5 cm. 

5. Experiment by Learning 2 or 3 keys initially and then carry out a Master 

Reset before completely Learning your original remote’s keyboard. 

6. Do not attempt to Learn directly under an incandescent or low-energy 

light.  

7. When Learning a key, do not release the key being Learned until the 

display returns and the LED remains on.  This can take 2-3 seconds. 

8. No functions may be stored under the LCD SCREEN, SLEEP, 

P

SEARCH keys or under rubber keys Setup, Macro, TV, VCR, DVD, 

CBL, SAT, CD, AUX or Audio keys. It is not possible to learn under 

“shifted keys”. 

3 to 5 cm