Garmin APOLLO GX SERIES Service Manual - page 95
Garmin AT
Rev --
© 2004 Garmin AT
GX Service Manual
7-57
6. Final System Check
The GX50/55/60/65 GPS navigation functions should be complete at this time. The final check
includes checking database, entering a direct to waypoint, and checking the navigation functions.
Start with the unit turned on and operating in the normal mode. Refer to the user’s manual for
operating instructions.
1. Verify a valid position is displayed.
2. Check the database to ensure it is for the right coverage area and check the expiration date.
To check the database:
a. Press SYS, rotate the large knob to the System Info page, and press ENTER.
b. Rotate the large knob to the Apollo GX Software Version page
c. Rotate the small knob to display the database information. The database name,
expiration date, and version will be displayed.
3. Enter a direct to waypoint. Press the Direct-To button, use the large and small knobs to select
a nearby waypoint, then press ENTER. Or use the nearest search function to select a
waypoint.
4. Verify the bearing and distance to the selected waypoint.