Garmin Edge 1000 Owner's Manual - Navigation
Deleting Files
NOTICE
If you do not know the purpose of a file, do not delete it. Your
device memory contains important system files that should not
be deleted.
1
Open the
Garmin
drive or volume.
2
If necessary, open a folder or volume.
3
Select a file.
4
Press the
Delete
key on your keyboard.
Disconnecting the USB Cable
If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss. If your device is connected to
your Windows computer as a portable device, it is not necessary
to safely disconnect.
1
Complete an action:
• For Windows computers, select the
Safely Remove
Hardware
icon in the system tray, and select your device.
• For Mac computers, drag the volume icon to the trash.
2
Disconnect the cable from your computer.
Navigation
Navigation features and settings also apply to navigating
).
• Locations and finding places (
• Planning a route (
)
• Optional maps (
• Map settings (
)
Locations
You can record and store locations in the device.
Saving Your Location
You can save your present location, such as your home or
parking spot.
1
From the home screen, select the status bar or swipe down
from the top of the page.
The connections page appears.
2
Select
GPS
>
Mark Location
> .
Saving Locations from the Map
1
From the home screen, select
Where To?
> >
A Map
Point
.
2
Browse the map for the location.
3
Select the location.
Location information appears at the top of the map.
4
Select the location information.
5
Select > .
Navigating to a Location
1
From the home screen, select
Where To?
.
2
Select an option:
• Select
Saved
to navigate to a saved course, location, or
segment.
• Select
Recent Finds
to navigate to one of the last 50
locations you have found.
• Select
Search Tools
to navigate to a point of interest or
specific address (requires routable maps), or a city,
intersection, or known coordinates.
• Select to narrow your search area.
3
If necessary, select to enter specific search information.
4
Select a location.
5
Select
RIDE
.
6
Follow the on-screen instructions to your destination.
Navigating to Known Coordinates
1
From the home screen, select
Where To?
>
Search Tools
>
Coordinates
.
2
Enter the coordinates, and select .
3
Follow the on-screen instructions to your destination.
Navigating Back to Start
At any point during your ride, you can return to the starting point.
1
2
During your ride, select anywhere on the screen to view the
timer overlay.
3
Select >
Where To?
>
Back to Start
.
4
Select
Along Same Route
or
Most Direct Route
.
5
Select
RIDE
.
The device navigates you back to the starting point of your
ride.
Stopping Navigation
1
Select anywhere on the screen to view the timer overlay.
2
Scroll to the map.
3
Select > .
Projecting a Location
You can create a new location by projecting the distance and
bearing from a marked location to a new location.
1
From the home screen, select
Where To?
>
Saved
>
Locations
.
2
Select a location.
3
Select the location information at the top of the screen.
4
Select >
Project Location
.
5
Enter the bearing and distance to the projected location.
6
Select .
Editing Locations
1
From the home screen, select
Where To?
>
Saved
>
Locations
.
2
Select a location.
3
Select the information bar at the top of the screen.
4
Select .
5
Select an attribute.
For example, select Change Elevation to enter a known
altitude for the location.
6
Enter the new information, and select .
Navigation
11