Garmin Edge 1000 Owner's Manual - Device Information
GPS Settings
Training Indoors
You can turn GPS off when you are training indoors or to save
battery life.
From the home screen, select >
System
>
GPS
>
GPS
Mode
>
Off
.
When GPS is off, speed and distance are not available unless
you have an optional sensor that sends speed and distance data
to the device (such as a speed or cadence monitor). The next
time you turn on the device, it will search for satellite signals
again.
Setting Your Elevation
If you have accurate elevation data for your present location,
you can manually calibrate the altimeter on your device.
1
From the home screen, select >
System
>
GPS
>
Set
Elevation
.
2
Enter the elevation, and select .
Viewing Satellites
The satellite page shows your current GPS satellite information.
For more information about GPS, go to
From the home screen, select >
System
>
GPS
>
View
Satellites
.
GPS accuracy appears at the bottom of the page. The green
bars represent the strength of each satellite signal received (the
number of the satellite appears below each bar).
Display Settings
Select >
System
>
Display
.
Auto Brightness
: Automatically adjusts the backlight brightness
based on the ambient light.
Backlight Timeout
: Sets the length of time before the backlight
turns off.
Color Mode
: Sets the device to display day or night colors. You
can select Auto to allow the device to automatically set day or
night colors based on the time of day.
Orientation
: Sets the device to display in portrait or landscape
mode.
Screen Capture
: Allows you to save the image on the device
screen.
Data Recording Settings
Select >
System
>
Data Recording
.
Record To
: Sets the data storage location (
).
Recording Interval
: Controls how the device records activity
data. The Smart option records key points where you change
direction, speed, or heart rate. The 1 Sec option records
points every second. It creates a very detailed record of your
activity and increases the size of the stored activity file.
Cadence Averaging
: Controls whether the device includes zero
values for cadence data that occur when you are not
pedaling (
Data Averaging for Cadence or Power
).
Power Averaging
: Controls whether the device includes zero
values for power data that occur when you are not pedaling
Data Averaging for Cadence or Power
).
Changing the Units of Measure
You can customize units of measure for distance and speed,
elevation, temperature, weight, position format, and time format.
1
Select >
System
>
Units
.
2
Select a measurement type.
3
Select a unit of measure for the setting.
Setting the Device Tones
From the home screen, select >
System
>
Tones
.
Changing the Device Language
From the home screen, select >
System
>
Language
.
Changing the Configuration Settings
You can modify all of the settings you configured in the initial
setup.
1
Select >
System
>
Device Reset
>
Initial Setup
.
2
Follow the on-screen instructions.
Time Zones
Each time you turn on the device and acquire satellites, the
device automatically detects your time zone and the current time
of day.
Device Information
Specifications
Edge Specifications
Battery type
Rechargeable, built-in lithium-ion battery
Battery life
15 hours, typical usage
Operating temperature
range
From -20º to 60ºC (from -4º to 140ºF)
Charging temperature
range
From 0º to 40ºC (from 32º to 104ºF)
Radio frequency/
protocol
2.4 GHz ANT+ wireless communications
protocol
Bluetooth Smart wireless technology
Wi
‑
Fi wireless technology
Water rating
IEC 60529 IPX7*
*The device withstands incidental exposure to water of up to 1 m
for up to 30 min. For more information, go to
Heart Rate Monitor Specifications
Battery type
User-replaceable CR2032, 3 volts
Battery life
Up to 4.5 yr. at 1 hr./day
Water resistance
3 ATM*
NOTE:
This product does not transmit heart
rate data while swimming.
Operating temperature
range
From -5° to 50°C (from 23° to 122°F)
Radio frequency/
protocol
2.4 GHz ANT+ wireless communications
protocol
*The device withstands pressure equivalent to a depth of 30 m.
For more information, go to
.
Speed Sensor and Cadence Sensor Specifications
Battery type
User-replaceable CR2032, 3 volts
Battery life
Approximately 12 months (1 hour per day)
Operating temperature
range
From -20º to 60ºC (from -4º to 140ºF)
Radio frequency/protocol 2.4 GHz ANT+ wireless communications
protocol
Water rating
1 ATM*
*The device withstands pressure equivalent to a depth of 10 m.
For more information, go to
.
Device Information
15