Garmin Edge 1000 Owner's Manual - page 16
Deleting a Location
1
From the home screen, select
Where To?
>
Saved
>
Locations
.
2
Select a location.
3
Select the location information at the top of the screen.
4
Select >
Delete Location
> .
Planning and Riding a Route
You can create and ride a custom route. A route is a sequence
of waypoints or locations that leads you to your final destination.
1
From the home screen, select
Where To?
>
Route Planner
>
Add First Location
.
2
Select an option:
• To select your current location on the map, select
Current
Location
.
• To select a saved location, select
Saved
, and select a
location, course, or segment.
• To select a location for which you recently searched,
select
Recent Finds
, and select a location.
• To select a location on the map, select
Use Map
, and
select a location.
• To browse for and select a point of interest, select
POI
Categories
, and select a nearby point of interest.
• To select a city, select
Cities
, and select a nearby city.
• To select an address, select
Address
, and enter the
address.
• To select an intersection, select
Intersections
, and enter
the street names.
• To use coordinates, select
Coordinates
, and enter the
coordinates.
3
Select
Use
.
4
Select
Add Next Location
.
5
Repeat steps 2–4 until you have selected all locations for the
route.
6
Select
View Route
.
The device calculates your route, and a map of the route
appears.
TIP:
You can select to view an elevation plot of the route.
7
Select
RIDE
.
Creating a Round-Trip Route
The device can create a round-trip route based on a specified
distance and a starting location.
1
From the home screen, select
Where To?
>
Round-Trip
Routing
.
2
Select
Distance
, and enter the total distance for the route.
3
Select
Start Location
.
4
Select an option:
• Select
Current Location
.
NOTE:
If the device cannot acquire satellite signals to
determine your current location, the device prompts you to
use the last known location or to select the location on the
map.
• Select
Use Map
to select a location on the map.
5
Select
Search
.
TIP:
You can select to search again.
6
Select a route to view it on the map.
TIP:
You can select and to view the other routes.
7
Select
RIDE
.
Route Settings
Select >
Activity Profiles
, select a profile, and select
Navigation
>
Routing
.
Routing Mode
: Allows you to select an activity for the device to
calculate your route (
Selecting an Activity for Route
Calculation Method
: Allows you to select the calculation
method to optimize your route.
Lock on Road (requires routable maps)
: Locks the position
icon, which represents your position on the map, onto the
nearest road.
Avoidance Setup (requires routable maps)
: Allows you to
select the road type you want to avoid.
Recalculation (requires routable maps)
: Allows you to select
the recalculation method when you deviate from the route.
Selecting an Activity for Route Calculation
You can set the device to calculate the route based on activity
type.
1
From the home screen, select >
Activity Profiles
.
2
Select a profile.
3
Select
Navigation
>
Routing
>
Routing Mode
.
4
Select an option to calculate your route.
For example, you can select Tour Cycling for on-road
navigation or Mountain Biking for off-road navigation.
Map Settings
Select >
Activity Profiles
, select a profile, and select
Navigation
>
Map
.
Orientation
: Sets how the map is shown on the page.
Auto Zoom
: Automatically selects a zoom level for the map.
When Off is selected, you must zoom in or out manually.
Guide Text
: Sets when the turn-by-turn navigation prompts are
shown (requires routable maps).
Map Visibility
: Allows you to set advanced map features.
Map Information
: Enables or disables the maps currently
loaded on the device.
Changing the Map Orientation
1
Select >
Activity Profiles
.
2
Select a profile.
3
Select
Navigation
>
Map
>
Orientation
.
4
Select an option:
• Select
North Up
to show north at the top of the page.
• Select
Track Up
to show your current direction of travel at
the top of the page.
• Select
3D Mode
to display the map in three dimensions.
Advanced Map Settings
Select >
Activity Profiles
, select a profile, and select
Navigation
>
Map
>
Map Visibility
.
Map Visibility Mode
: Auto and High Contrast have preset
values. You can choose Custom to set each value.
Zoom Levels
: Sets map items to draw or appear at or below the
selected zoom level.
Text Size
: Sets the text size for map items.
Detail
: Sets the amount of detail shown on the map. Showing
more detail may cause the map to redraw more slowly.
Shaded Relief
: Shows detail relief on the map (if available) or
turns off shading.
12
Navigation