Garmin Edge 1000 Owner's Manual - page 22
Front Gear
: The front bike gear from a Di2 sensor.
Gear Ratio
: The number of teeth on the front and rear bike
gears.
Gears
: The front and rear bike gears from a Di2 sensor.
GPS Accuracy
: The margin of error for your exact location. For
example, your GPS location is accurate to within +/- 3.65 m
(12 ft.).
GPS Signal Strength
: The strength of the GPS satellite signal.
Grade
: The calculation of rise (elevation) over run (distance).
For example, if for every 3 m (10 ft.) you climb you travel
60 m (200 ft.), the grade is 5%.
Heading
: The direction you are moving.
Heart Rate
: Your heart rate in beats per minute (bpm). Your
device must be connected to a compatible heart rate monitor.
HR - %HRR
: The percentage of heart rate reserve (maximum
heart rate minus resting heart rate).
HR - %Max.
: The percentage of maximum heart rate.
HR - Avg.
: The average heart rate for the current activity.
HR - Avg. %HRR
: The average percentage of heart rate reserve
(maximum heart rate minus resting heart rate) for the current
activity.
HR - Avg. %Max.
: The average percentage of maximum heart
rate for the current activity.
HR Graph
: A line graph showing your current heart rate zone (1
to 5).
HR - Lap
: The average heart rate for the current lap.
HR - Lap %HRR
: The average percentage of heart rate reserve
(maximum heart rate minus resting heart rate) for the current
lap.
HR - Lap %Max.
: The average percentage of maximum heart
rate for the current lap.
HR - Last Lap
: The average heart rate for the last completed
lap.
HR to Go
: During a workout, the amount you are above or
below the heart rate target.
HR Zone
: The current range of your heart rate (1 to 5). The
default zones are based on your user profile and maximum
heart rate (220 minus your age).
Laps
: The number of laps completed for the current activity.
Location at Dest.
: The last point on the route or course.
Location at Next
: The next point on the route or course.
Odometer
: A running tally of distance traveled for all trips. This
total does not clear when resetting the trip data.
PCO
: The platform center offset. Platform center offset is the
location on the pedal platform where you apply force.
PCO - Avg.
: The average platform center offset for the current
activity.
PCO - Lap
: The average platform center offset for the current
lap.
Pedal Smoothness
: The measurement of how evenly a rider is
applying force to the pedals throughout each pedal stroke.
Power
: The current power output in watts.
Power - %FTP
: The current power output as a percentage of
functional threshold power.
Power - 10s Avg.
: The 10-second moving average of power
output.
Power - 30s Avg.
: The 30-second moving average of power
output.
Power - 3s Avg.
: The three-second moving average of power
output.
Power - Avg.
: The average power output for the current activity.
Power - IF
: The Intensity Factor
™
for the current activity.
Power - kJ
: The accumulated work performed (power output) in
kilojoules.
Power - Lap
: The average power output for the current lap.
Power - Lap Max.
: The top power output for the current lap.
Power - Last Lap
: The average power output for the last
completed lap.
Power - Max.
: The top power output for the current activity.
Power - NP
: The Normalized Power
™
for the current activity.
Power - NP Lap
: The average Normalized Power for the current
lap.
Power - NP Last Lap
: The average Normalized Power for the
last completed lap.
Power Phase - L.
: The current power phase angle for the left
leg. Power phase is the pedal stroke region where you
produce positive power.
Power Phase - L. Avg.
: The average power phase angle for the
left leg for the current activity.
Power Phase - L. Lap
: The average power phase angle for the
left leg for the current lap.
Power Phase - L. Peak
: The current power phase peak angle
for the left leg. Power phase peak is the angle range over
which you produce the peak portion of the driving force.
Power Phase - L. Peak Avg.
: The average power phase peak
angle for the left leg for the current activity.
Power Phase - L. Peak Lap
: The average power phase peak
angle for the left leg for the current lap.
Power Phase - R.
: The current power phase angle for the right
leg. Power phase is the pedal stroke region where you
produce positive power.
Power Phase - R. Avg.
: The average power phase angle for the
right leg for the current activity.
Power Phase - R. Lap
: The average power phase angle for the
right leg for the current lap.
Power Phase - R. Peak
: The current power phase peak angle
for the right leg. Power phase peak is the angle range over
which you produce the peak portion of the driving force.
Power Phase - R. Peak Avg.
: The average power phase peak
angle for the right leg for the current activity.
Power Phase - R. Peak Lap
: The average power phase peak
angle for the right leg for the current lap.
Power - TSS
: The Training Stress Score
™
for the current activity.
Power - watts/kg
: The amount of power output in watts per
kilogram.
Power Zone
: The current range of power output (1 to 7) based
on your FTP or custom settings.
Rear Gear
: The rear bike gear from a Di2 sensor.
Reps to Go
: During a workout, the remaining repetitions.
Speed
: The current rate of travel.
Speed - Avg.
: The average speed for the current activity.
Speed - Lap
: The average speed for the current lap.
Speed - Last Lap
: The average speed for the last completed
lap.
Speed - Max.
: The top speed for the current activity.
Sunrise
: The time of sunrise based on your GPS position.
Sunset
: The time of sunset based on your GPS position.
Temperature
: The temperature of the air. Your body
temperature affects the temperature sensor.
Time
: The stopwatch time for the current activity.
Time - Avg. Lap
: The average lap time for the current activity.
Time - Elapsed
: The total time recorded. For example, if you
start the timer and run for 10 minutes, then stop the timer for
18
Appendix