Garmin GNC 420AW Installation Manual - page 157
400W Series Installation Manual
Page G-1
190-00356-02
Rev. E
Appendix G APPROVED EQUIPMENT
The following tables list equipment that can be interfaced with the Garmin 400W Series units. This is
not a complete listing however; it only represents those units that are approved under 400W/500W Series
AML STC SA01933LA, with any exceptions noted by the appropriate table. When installing equipment
on the aircraft always refer to the manufacturers’ documentation for complete pinout and interconnect
information.
G.1 Audio
Panels
Audio panels not listed below can still be approved under 400W/500W Series AML STC SA01933LA if
all
of the following conditions are met:
•
The installation of the audio panel was previously was previously FAA-approved;
•
The VHF COM audio and VHF NAV audio (if applicable) must be verified as described in
sections 5.5.4
and
5.5.5.
Manufacturer Model
Data
Format
Notes
Honeywell (Bendix/King)
KMA 24
KMA 24H-70/71
KMA 26
KMA 28
Garmin
GMA 340
GMA 347
Garmin AT
SL15
SL15M
SL10S
SL10MS
SL10
SL10M
PS Engineering
PMA 6000
PMA 7000 Series
PMA 8000 Series
G.2 Air Data Computer
Air Data Computers not listed below can still be approved under 400W/500W Series AML STC
SA01933LA if
all
of the following conditions are met:
•
The air data computer is TSO approved;
•
The installation of the air data computer was previously FAA-approved;
•
The interface check for the altitude encoder described in section
5.4.4
must be successfully
completed.
Manufacturer Model
Data
Format
Notes
B & D
2600
2601
2800
90004-003
ARINC 429
ARINC 429
ARINC 429
ARINC 429
Honeywell (Bendix/King)
KDC 281
KDC 481
ARINC 429
ARINC 429
Insight
TAS 1000
ARINC 429