Garmin GNC 420AW Installation Manual - page 46
Page 3-2
GNS 400W Series Installation Manual
Rev. G
190-00356-08
3.2
Optional Accessories
3.2.1
GPS Antenna Options
For details regarding antenna selection, refer to Section 1.4.8. Once the antenna type is decided upon,
refer to the information below for detailed parts information for antennas available directly from Garmin.
Contact manufacturer directly for information on other antennas.
GA 35 Antenna:
GA 35 Antenna Garmin P/N 013-00235-00 contains the following items:
ITEM
PART NUMBER
QTY
GA 35 GPS/WAAS Antenna [1]
013-00235-00 (Garmin)
1
AT575-93G (Aero Antenna)
[1] Antenna includes 8-32 UNC-2A x 1.00‖ SS 303 mounting screws (qty 4) and O-ring (qty 1).
An antenna doubler may also be required. Refer to the appropriate antenna installation data.
To secure the antenna #8 washers (qty 4) and #8 (qty 4) self-locking nuts are required in addition to
the antenna, or suitable nutplates may be installed on the doubler.
To connect the GPS antenna coaxial cable to the antenna a TNC plug is required.
GA 36 Antenna:
GA 36 Antenna Garmin P/N 013-00244-00 contains the following items:
ITEM
PART NUMBER
QTY
GA 36 GPS/WAAS Antenna [1]
013-00244-00 (Garmin)
1
AT575-126G (Aero Antenna)
[1] Antenna includes 8-32 UNC-2A x 1.00‖ SS 303 mounting screws (qty 4) and O-ring (qty 1).
An antenna doubler may also be required. Refer to the appropriate antenna installation data.
To secure the antenna #8 washers (qty 4) and #8 (qty 4) self-locking nuts are required in addition to
the antenna, or suitable nutplates may be installed on the doubler.
To connect the GPS antenna coaxial cable to the antenna a TNC plug is required.
GA 37 Antenna:
GA 37 Antenna Garmin P/N 013-00245-00 contains the following items:
ITEM
PART NUMBER
QTY
GA 37 GPS/WAAS + XM Antenna [1]
013-00245-00 (Garmin)
1
AT2300-126G (Aero Antenna)
[1] Antenna includes 8-32 UNC-2A x 1.00‖ SS 303 mounting screws (qty 4) and O-ring (qty 1).
An antenna doubler may also be required. Refer to the appropriate antenna installation data.
To secure the antenna #8 washers (qty 4) and #8 (qty 4) self-locking nuts are required in addition to
the antenna, or suitable nutplates may be installed on the doubler.
To connect the GPS antenna coaxial cable to the antenna a TNC plug is required.
3.2.2
Other Accessories
None.