Garmin GNC 420AW Installation Manual - page 99
GNS 400W Series Installation Manual
Page 5-21
190-00356-08
Rev. G
5.3.15
VOR/LOC/GS ARINC 429 CONFIG Page (GNS 430W Only)
Select the VOR/LOC/GS ARINC 429 CONFIG Page
(see Figure 5-20). This page configures the VOR/ILS
ARINC 429 output and input ports.
SPEED
Selection
Description
Low
Standard low-speed ARINC 429 (nominally 12.5 kilobits per second)
High
High-speed ARINC 429 (nominally 100 kilobits per second)
SDI
Selection
Description
Common
RX: Accepts all 429 inputs
TX: Generates all 429 outputs with SDI = 0.
VOR/ILS 1
Number 1 (Pilot) VOR/ILS Receiver
RX: Accepts 429 inputs with SDI = 0 or 1.
TX: Generates all 429 outputs with SDI = 1.
VOR/ILS 2
Number 2 (Copilot) VOR/ILS Receiver
RX: Accepts 429 inputs with SDI = 0 or 2.
TX: Generates all 429 outputs with SDI = 2.
DME MODE
Selection
Description
Directed freq 1
If the GNS 430W is connected to a multi-channel ARINC 429 DME,
channel 1 of that DME is tuned. “Directed freq 1” should be selected if
a single-channel ARINC 429 DME is tuned.
Directed freq 2
If the GNS 430W is connected to a multi-channel ARINC 429 DME,
channel 2 of that DME is tuned.
Figure 5-20. VOR/LOC/GS ARINC
429 CONFIG Page