Holzmann SM 100 User Manual - page 19
SAFETY
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at
Seite 19
SATINIERMASCHINE / BURNISHING MACHINE SM 100
12.2
Security instructions
Missing or non-readable security stickers have to be replaced immediately!
To avoid malfunction, machine defects and injuries, read the following security instructions!
The locally applicable laws and regulations may specify the minimum age of the operator and limit
the use of this machine!
Keep your work area dry and tidy! An untidy work area may cause
accidents. Avoid slippery floor.
Make sure the work area is lighted sufficiently
Do not overload the machine
Provide good stability and keep balance all times
Avoid abnormal working postures! Make sure you stand squarely
and keep balance at all times.
Keep away from the running abrasive!
Always stay focused when working. Reduce distortion sources in
your working environment. The operation of the machine when
being tired, as well as under the influence of alcohol, drugs or
concentration influencing medicaments is forbidden.
Respectively trained people only and only one person shall
operate the machine.
Do not allow other people, particularly children, to touch the
machine or the cable. Keep them away from your work area.
Make your workshop childproof.
Wear suitable work clothes! Do not wear loose
clothing or jewelry as they might get caught in
moving parts and cause severe accidents! Wear a
hair net if you have long hair.
Use personal safety equipment: dust mask, ear protectors and
safety goggles when working with the machine.
Never leave the machine running unattended! Before leaving
the working area switch the machine off and wait until the
machine stops.
Always disconnect the machine prior to any actions performed
at the machine.
Avoid unintentional starting
Do not use the machine with damaged switch
Keep any machine that is not being used out of reach of
children