Holzmann SM 100 User Manual - page 21
ASSEMBLY
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at
Seite 21
SATINIERMASCHINE / BURNISHING MACHINE SM 100
13
ASSEMBLY
13.1
Delivery content
The machine is delivered pre-assembled.
For transport reasons, some parts of the machine can be assembled by the customer.
Check right after receiving the machine, whether all parts according to the parts list are complete
and without damage. Each visible defect and in particular wrong amounts and transport damages
must be clearly noted on the delivery documents, otherwise the goods shall be considered as
taken over and fully accepted under the sole responsibility of the customer.
13.2
Assembly
13.2.1 Install abrasive protection
Turn the abrasive protection in the position
that showing the handle bracket up and tighten
the mounting screw with an Allen key.
13.2.2 Handle
Place the handle in front on the abrasive guard
and tighten by hand.