Holzmann SM 100 User Manual - page 22
Manual is about: BURNISHING MACHINE
of
33
ASSEMBLY
HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at
Seite 22
SATINIERMASCHINE / BURNISHING MACHINE SM 100
13.2.3 Install Abrassive
Step 1:
Pull the abrasive (2) on
the drive shaft (1) and
ensure good fit.
Step 2:
Put the two dovetailing
(3) into the slots used
at the shaft end.
Step 3:
Place the spacer (4)
centered on the shaft,
insert the Allen screw
(5) into the thread and
tighten with an Allen
key. Block the shaft by
pressing the shaft-lock-
button (9).