IC Realtime PTZ2300SIR User Manual - page 15
9
z
ZOOM DISP: Display speed dome zoom speed value or not. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z
INSIDE TEMPERATURE: Display dome internal temperature or not. There are three options:
℃
/F/Off. Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
z
TITLE DISPLAY: Here you can set to display speed dome position information and etc. You can use
the speed dome control terminal to set the detailed title information. Please use the left/right button
to set.
z
BACK: Go back to the previous menu.
z
EXIT: Log out system menu.
3.4.3 Camera Setting
Move the cursor to CAMERA SETTING and then click confirm button, you can go to the submenu.
z
WHITE BALANCE SETUP: It is to set camera white balance mode. Move the cursor to current
option and then click confirm button, you can go to the third menu.
z
EXPOSURE SETTING: It is to set camera exposure mode, gain and etc. Move the cursor to current
option and then click confirm button, you can go to the third menu.
z
DAY/NIGHT: Set day/night mode. Move the cursor to current option and then click confirm button,
you can go to the third menu.
z
FOCUS SETUP: It is to set the camera focus mode, focus limit and etc. Please move the light to
highlight current item and then click the OK button to go to the next level menu.
z
ZOOM SPEED: The bigger the value, the faster the speed. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z
APERTURE: It is to adjust the lens to achieve clear video. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z
APERTURE RESTRAIN: System can auto reduce the aperture to lower the video noise when it is in
low illumination environment. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
z
NEXT PAGE: It includes the following options: DIGITAL ZOOM, DIGITAL ZOOM LIMIT, PICTURE
FLIP, FREEZE FUNCTION, OUTPUT MODE, CAMERA FACTORY DEFAULT SETUP, and
CAMERA RESTART. Please use the left/right button on the keyboard or in the speed dome terminal
menu to set.
z
DIGITAL ZOOM: You can use the left/right button to enable/disable the digital zoom function.
z
DZOOM LIMIT: Here you can set the threshold of the digital zoom. Please use the left/right button
on the keyboard or in the speed dome terminal menu to set.
z
PICTURE FLIP: There are two options: on/off. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
WB SETTING
EXPOSURE SETTING
DAY/NIGHT SETTING
FOCUS SETTING
ZOOM SPEED :8
APERTURE :9
APERTURE RESTRAIN :10
NEXT PAGE
BACK EXIT
DIGITAL ZOOM :OFF
DIGITAL ZOOM LIMIT :X1.5
PICTURE FLIP :OFF
FREEZE FUNC :OFF
IMAGE
STABILIZATION
:OFF
CAMERA FACTORY DEFAUTL
CAMERA RESTART
BACK EXIT