IC Realtime PTZ2300SIR User Manual - page 16
10
z
FREEZE FUNCTION: This function allows the system from one preset to another preset, without
showing the video during the PTZ movement. There are two options: on/off. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
z
IMAGE STABILIZATION: This function can guarantee video stability once there is any vibration on
the speed dome installation environments .
z
CAMERA FACTORY DEFAULT: Move the cursor to current item and then click confirm button to
restore factory default setup.
z
CAMERE RESTART: Move the cursor to current item and then click confirm button to reboot the
camera.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
3.4.3.1 White Balance Setup
Move the cursor to WHITE BALANCE MODE and then click confirm button, you can go to the submenu.
z
WHITE BALANCE MODE: Set white balance adjustment mode. There are two modes: auto/manual.
Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
z
R GAIN: Before you set R GAIN option, please note the mode is manual. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
z
B GAIN: Before you set B GAIN option, please note the mode is manual. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
3.4.3.2 Exposure Setting
z
AE MODE: Here you can set the camera exposure mode. It includes: auto/manual/AV (iris
priority)/TV (shutter priority). Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
Auto: It is for you to set the exposure compensation, backlight compensation (BLC), slow
shutter, wide dynamic region (WDR).
Manual: It is for you to set the gain setting, shutter, iris setting, wide dynamic region (WDR).
Iris Priority (AV): It is for you to set the exposure setting, iris setting, wide dynamic region
(WDR).
Shutter Priority (TV): It is for you to set the shutter setting, exposure compensation, wide
dynamic region (WDR).
z
GAIN SETTING: It is to set camera gain. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
WB MODE : AUTO
R GAIN : 210
B GAIN : 150
BACK EXIT
AE MODE :AUTO
GAIN SETTING : 2
SHUTTER :1/50
IRIS SETTING :4
EXPOSURE COMP :8
SLOW AE :1
SLOW SHUTTER :ON
NEXT PAGE
BACK EXIT
AGC GAIN LIMIT :2
HIGH GAIN :OFF
SLOW SHUTTER LIMIT :1/25
NOISE REDUCTION :3
3D NOISE REDUCTION :OFF
BLC :OFF
WDR
AE RECOVERY :15MIN
BACK EXIT