IC Realtime PTZ2300SIR User Manual - page 17
11
DAY/NIGHT :AUTO
DAY TIME :07H 00M
NIGHT TIME :19H 00M
THRESHOLD : 4
SAVE
BACK EXIT
z
SHUTTER: It is to set camera shutter. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z
IRIS SETTING: It is to set camera iris. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z
EXPOSURE COM: It is to set camera exposure compensation. Please use the left/right button on
the keyboard or in the speed dome terminal menu to set.
z
SLOW AE: In the strong light environment, you can lower the camera exposure speed to capture
the image and enhance the definition. The larger the value, the faster the speed. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
z
SLOW SHUTTER: In lower illumination environment, you can lower the cameras auto exposure
time to capture the image and enhance the definition. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
z
NEXT PAGE: It includes: AGC GAIN LIMIT, SLOW SHUTTER LIMIT, NOISE REDUCTION, 3D
NOISE REDUCTION, BLC, WDR, BACK, and EXIT. Move the cursor to the item and then click the
left/right button to set.
o
AGC GAIN LIMIT: It is to set auto gain high limit. Please click the left/right button to set.
o
SLOW SHUTTER LOW LIMIT: It is to set slow shutter low limit. Please click the left/right
button to set.
o
NOISE REDUCTION: There may noise when the camera is monitoring the low
illumination environments. You can use the digital filter to process the noise to
guarantee the clear video.
o
3D NOISE REDUCTION: It is to set the speed dome 3D noise reduction setup. Please
use the left/right button on the keyboard or in the speed dome terminal menu to set.
o
BLC: It is an abbreviation for back light compensation. System can compensate the
object in the dark light to achieve a clear video. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
o
WDR: It is an abbreviation for wide dynamic region. Please make sure your camera
supports current function. This function can adjust the video brightness when the
contrast between the strong light and the dark light is too high. Move the cursor to
current item and then click the OK button to go to the fourth level menu. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
o
AE RECOVERY: Manually click the “+” and “-“button on the PTZ interface, system cam
resume previous exposure value after specified time (The exposure value does not
resume if this function is off.).
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
3.4.3.3 Day/Night Setting
Move the cursor to DAY/NIGHT SETTING and then click confirm button, you can go to the submenu.