Intergraph Zx10 Ultra-Tower System Manual - page 25
13
Creating a SCSI Controller Driver Diskette
If you reinstall the operating system, you must install the SCSI controller driver software from
diskette. You cannot install it from the system’s driver CD.
The SCSI controller driver software is in a folder on the system’s driver CD. Copy the contents of
the version number folder (including any folders beneath it) to diskette. If you have to reinstall the
operating system, use this diskette when asked for the SCSI controller driver software.
Creating an Emergency Repair Disk
If you did not create an Emergency Repair Disk during Setup, you should do so after completing
Setup and configuring the system. See the operating system documentation and Help for
information on creating an Emergency Repair Disk.
You can use the files on the Emergency Repair Disk to restore the contents of the operating system
registry and the standard operating system driver software. You should update the Emergency
Repair Disk frequently, especially after adding or changing system hardware or software.
Installing Driver Software
Driver software (or drivers) for most system components and peripheral devices was installed
before shipment. You received a CD with your system that contains these drivers. Keep the driver
CD in case you have to reinstall the operating system or drivers later.
Because of production timing, drivers for your system may have been revised after your system
shipped from the factory. You should check Intergraph Computer Systems’ online services for the
latest versions of your system’s drivers. If a later version of a driver is available, you can
download it and install it on your system; keep it on diskette in case you need to reinstall it later.
See the Preface of this document for information on the online services, and see the
README
file
delivered with a driver for installation instructions.
Installing QFE Software
Quick-Fix Engineering (QFE) software contains fixes for operating system problems or limitations;
these fixes are required for proper operation of your system. QFE software, when required, is
delivered on the system’s driver CD, and additional QFE software may be delivered on diskette. If
you received QFE software with your system, it was installed before shipment. Keep the QFE
software in case you have to reinstall it or the operating system later.
Because of production timing, the QFE software for your system may have been revised after your
system shipped from the factory. You should check Intergraph Computer Systems’ online services
for the latest version of the QFE software for your system. If a later version is available, you can
download it and install it on your system; keep it on diskette in case you need to reinstall it later.