Intergraph Zx10 Ultra-Tower System Manual - page 64
52
For more information:
♦
On how to replace or add an internal peripheral device, see Chapter 9, “Servicing the System.”
♦
On internal cabling for peripheral devices, see Chapter 10, "System Hardware and
Specifications."
♦
On SCSI IDs, termination, buses, and the SCSI controller, see “Adding External SCSI
Peripheral Devices” in this chapter.
♦
On device power and data connections to the system board, see the System Board Manual.
Have the vendor’s documentation available to follow instructions for setting the SCSI ID, enabling
or disabling termination, installing device drivers when required, and configuring other drive
attributes.
If you are installing a internal peripheral device that connects to an expansion card, see the
vendor’s documentation for installing the expansion card and required cables. See “Adding
Expansion Cards” for details.
Bay 1
Bay 2
Bay 3
Bay 4
Bay 5
Bay 6
Bay 7