Intergraph Zx10 Ultra-Tower System Manual - Using The Floppy Disk Drive
28
Using the Floppy Disk Drive
The system’s floppy disk drive occupies a 3.5-inch external peripheral device bay, and is
accessible through a 3.5-inch slot on the front of the base unit. The drive accepts standard 3.5-inch
720 KB and 1.44 MB diskettes.
Follow these guidelines to use the floppy disk drive:
♦
To insert a diskette, slide the diskette with the arrow facing up into the slot. Push the diskette
in until it clicks into place and the eject button pops out.
♦
Before removing a diskette, ensure the drive LED is not lit.
♦
To remove a diskette, push the eject button and pull the diskette out of the slot.
♦
To protect the data on a diskette from being overwritten or erased, slide the write-protect tab
on the diskette toward the diskette edge until it snaps into place.
Using the CD-ROM Drive
The system’s CD-ROM drive occupies a 5.25-inch external peripheral device bay, and is
accessible through a tray or a slot at the front of the base unit. The drive supports software
ejection of discs and has an external amplified headphone jack.
Drive LED
Eject Button
Headphones
Volume Control
Drive LED
Eject Button