Intergraph Zx10 Ultra-Tower System Manual - Internal Peripheral Cabling

74

Internal Peripheral Cabling

The following sections show EIDE and SCSI cable routings and connections to internal peripheral

devices, and depicts standard and optional cables used in the system.  For detailed information and

location of bus connectors on the system board, see the System Board Manual.

CAUTION

When handling cables, flex them as little as possible.  Ensure that cables do not

contact sharp metal surfaces or become excessively bent or twisted.  In particular,

SCSI cables should not have any creased bends.

EIDE Cabling

The installed EIDE cable connects the primary EIDE channel to the CD-ROM drive and to another

front-access peripheral device.  Another EIDE cable, which can connect the secondary EIDE

channel to two front-access peripheral devices, is provided with the system but is not installed.

CD-ROM drive

Installed cable connects primary

EIDE channel to CD-ROM drive and

to one front-access EIDE device

Additional cable (provided but not

installed) connects secondary

EIDE channel to two front-access

EIDE devices