1. DL manuals
  2. Intermec
  3. Printer
  4. EasyCoder 501XP
  5. Supplementary Manual

Intermec EasyCoder 501XP Supplementary Manual

Manual is about: Bar Code Label Printers

Summary of EasyCoder 501XP

  • Page 1

    Easycoder f/xp-series bar code label printers easyset bar code wand setup p/n 1-960560-00 edition 1 november 2001.

  • Page 2: 1. Connection and Operation

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 1 chapter 1 1. Connection and operation 1. Connect the optional easyset bar code wand to the receptacle on the printer’s rear plate. 3. When the bar code has been accepted, the printer emits a short beep and the “ready” control lamp...

  • Page 3: Start Fnc3 Code C

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 2 chapter 2 the only bar code that can be used eith the easyset bar code wand is a code 128 containing the function character fnc3 (ascii 130 dec). If the fnc character is missing, the printer will regard the bar code as containing ...

  • Page 4: Introduction, Cont.

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 3 chapter 2 creating setup bar codes introduction, cont. Example: creating a bar code, which sets the contrast to -10% and the stop adjust value to 500: 10 barset "code128",2,1,3,240 (specifi es bar code) 20 a$ = chr$(130) (fnc3) 30...

  • Page 5: Serial Communication

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 4 chapter 2 creating setup bar codes serial communication parameter setting setup id setup uart1: uart2: uart3: value baudrate 300 00 20 40 00 600 00 20 40 01 1200 00 20 40 02 2400 00 20 40 03 4800 00 20 40 04 9600 00 20 40 05 19200...

  • Page 6: Feed Adjust

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 5 chapter 2 creating setup bar codes feed adjust parameter setting id value feedadj,startadj -5000 to +4999 90 ssss feedadj,stopadj -5000 to +4999 91 ssss media parameter setting id value media,contrast -10% 70 00 -8% 70 01 -6% 70 0...

  • Page 7: Media, Cont.

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 6 chapter 2 creating setup bar codes media, cont. Parameter setting id value media,testfeed see note 2 83 see note note: the input data to a testfeed setup bar code is 83uuuuuuuu, where the first 4 digits specify the comparator valu...

  • Page 8: Baud Rate

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 7 chapter 3 serial communication on "uart1:" (all) baud rate 4800 9600 19200 38400 57600 115200 parity none even odd mark space 7 char. Length 8.

  • Page 9: No. Of Stop Bits

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 8 chapter 3 setup bar code samples serial communication on "uart1:" (all), cont. No. Of stop bits rts/cts xon/xoff, data to host reset comm. To default 1 2 enable disable disable enable enable disable 9600-8-none-1 enq/ack.

  • Page 10: Xon/xoff, Data From Host

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 9 chapter 3 setup bar code samples xon/xoff, data from host new line enable disable cr/lf lf cr serial communication on "uart1:" (all), cont..

  • Page 11: Cut Between Labels

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 10 chapter 3 setup bar code samples start- and stopadjust (f-series only – 8 dots/mm) cut between labels tear-off -100/0 cut variable length strip cut/print from tof default 0/0 peel-off -56/-44 0/+160 -250/+160 -250/+275 start- and...

  • Page 12: Contrast (All)

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 11 chapter 3 setup bar code samples contrast (all) -10% -6% 0% +6% +10% -4% -2% +2% +4% +8% -8%.

  • Page 13: Test Labels (All)

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 12 chapter 3 setup bar code samples test labels (all) #1 #2 #3 #4 #5.

  • Page 14

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 13 chapter 3 setup bar code samples media width (f-series only – 8 dots/mm) 70 mm (2.76 in) 84 mm (3.31 in) 43 mm (1.69 in) 53 mm (2.09 in) 85 mm (3.35 in) 87 mm (3.43 in) 90 mm (3.54 in) 102 mm (4.02 in) 104 mm (4.10 in) 25 mm (0.9...

  • Page 15

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 14 chapter 3 setup bar code samples media width (xp-series only – 12 dots/mm) 84 mm (3.31 in) 85 mm (3.35 in) 87 mm (3.43 in) 90 mm (3.54 in) 102 mm (4.02 in) 104 mm (4.10 in) 110 mm (4.33 in) 115 mm (4.53 in) 43 mm (1.69 in) 53 mm ...

  • Page 16

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 15 chapter 3 setup bar code samples media length (f-series only – 8 dots/mm) 25 mm (0.98 in) 28 mm (1.10 in) 49 mm (1.93 in) 55 mm (2.17 in) 74 mm (2.91 in) 88 mm (3.47 in) 90 mm (3.54 in) 100 mm (3.94 in) 102 mm (4.02 in) 104 mm (4...

  • Page 17

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 16 chapter 3 setup bar code samples media length (xp-series only – 12 dots/mm) 25 mm (0.98 in) 28 mm (1.10 in) 49 mm (1.93 in) 55 mm (2.17 in) 74 mm (2.91 in) 88 mm (3.47 in) 90 mm (3.54 in) 100 mm (3.94 in) 102 mm (4.02 in) 104 mm ...

  • Page 18: Media Type (All)

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 17 chapter 3 setup bar code samples media type (all) fix length strip var length strip label (w gaps) ticket (w gaps) ticket (w mark).

  • Page 19

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 18 chapter 3 setup bar code samples print speed (all; >200 mm/sec xp-series only) 100 mm (3.93 in) per second 125 mm (4.92 in) per second 150 mm (5.91 in) per second 175 mm (6.89 in) per second 200 mm (7.87 in) per second 225 mm (8....

  • Page 20: Paper Type (F-Series Only)

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 19 chapter 3 setup bar code samples direct thermal printing (europe) paper type (f-series only) based on fingerprint v7.60 direct thermal printing (usa) duratherm ii duratherm ltg duratherm ir duratherm ii tag thermal top board ther...

  • Page 21

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 20 chapter 3 setup bar code samples thermal transfer printing (europe) paper type (f-series only), cont. Gp02/ttr uncoated gp02/ttr matte coated gp02/ttr premium hp66/ttr matte coated hp66/ttr premium hp66/ttr premium board hp66/ttr...

  • Page 22

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 21 chapter 3 setup bar code samples thermal transfer printing (europe), cont. Paper type (f-series only), cont. Hp07/ttr premium hp07/ttr premium board hp07/ttr high gloss white premium hp07/ttr polyethylene hp07/ttr gloss polyethyl...

  • Page 23

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 22 chapter 3 setup bar code samples thermal transfer printing (europe), cont. Paper type (f-series only), cont. Hr03/ttr high gloss polyester hp05/ttr gloss polyethylene.

  • Page 24

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 23 chapter 3 setup bar code samples thermal transfer printing (u.S.A.) paper type (f-series only), cont. Basewax/duratran ii basewax/duratran ii tag basewax/kimdura basewax/syntran standard/duratran ii standard/duratran ii tag stand...

  • Page 25

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 24 chapter 3 setup bar code samples thermal transfer printing (u.S.A.), cont. Paper type (f-series only), cont. Premium/kimdura premium/matte polyester premium/syntran super premium/polyester premium/duratran ii tag standard/syntran...

  • Page 26: Paper Type (Xp-Series Only)

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 25 chapter 3 setup bar code samples direct thermal printing (europe) paper type (xp-series only) based on fingerprint v7.40 top board standard/premium economy eco board premium high speed direct thermal printing (usa) duratherm ii d...

  • Page 27

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 26 chapter 3 setup bar code samples thermal transfer printing (europe) paper type (xp-series only), cont. Gp02/vellum gp02/matte coated gp02/transfer premium hp07/premium tag hp07/matte coated hp07/transfer premium hp07/polyethylene...

  • Page 28

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 27 chapter 3 setup bar code samples thermal transfer printing (europe), cont. Paper type (xp-series only), cont. Hp66/polyethylene gloss hp66/polyethylene matt hr03/polyester gloss hp66/premium tag.

  • Page 29

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 28 chapter 3 setup bar code samples thermal transfer printing (u.S.A.) paper type (xp-series only), cont. Standard/duratran i standard/duratran vg standard/duratran ii standard/duratran ii tag standard/kimdura standard/kimdura tag p...

  • Page 30

    Intermec easycoder f/xp-series – easyset bar code wand setup, ed. 1 29 chapter 3 setup bar code samples thermal transfer printing (u.S.A.), cont. Paper type (xp-series only), cont. Super premium/polyester.