JDS Uniphase OLP-34 Operating Instructions Manual - 3 G
JDSU
OLP-34/-35/-38
11
3 G
ETTING
S
TARTED
Keys
Each key has two functions. Press the key once for the
first function. Press and hold the key for more than 2
seconds for the second function of the key.
1
Test head cover
2
Connector panel
3
Device label
4
Display
5
External power supply connector
USB interface (only BN 2302/11/12/13) for power
supply and measurement data downloads
6
Battery compartment (on rear of the device)
7
Key pad
First function:
Press to switch the
device on and off (ECON).
Second function:
Press to switch the
device on (PERM).
First function:
Press to select a
wavelength out of 5 predefined
wavelengths.
Second function:
Change the
predefined wavelength.
First function:
Enable/Disabe
automatic wavelength recognition.
Second function:
Clear current
memory location.
First function:
Press to store current
measurement.
Second function:
Recall the stored
measurements.
First function:
Press to toggle level
display between:
• dBm/Watt (absolute mode)
• dB (relative mode)
Second function:
Set reference level.