JDS Uniphase OLP-34 Operating Instructions Manual - Peration
Manual is about: Optical Power Meter
of
86
JDSU
OLP-34/-35/-38
15
4
O
PERATION
Switching the device on/off
The OLP-3x has two power modes:
•
Permanent ON (PERM):
The device is switched on permanently.
•
Automatic OFF (ECON):
The device switches off 20 minutes after the last
operation. This function is only available when the
device is powered from batteries.
To switch the device on:
Press
[
*
]
to switch on the device in ECON mode.
Press and hold down
[
*
]
for more than 2 sec.
to
switch on the device in PERM mode.
To switch the device off:
Press
[
*
]
to switch off the device.