Jeep Grand Cherokee Quick Reference Manual - page 8
To activate AutoStick mode, move the gear
selector into the MANUAL (M) position (beside
the DRIVE position), or tap one of the shift
paddles on the steering wheel. Tapping the
(-) shift paddle to enter AutoStick mode will
downshift the transmission to the next lower
gear, while tapping (+) to enter AutoStick mode
will retain the current gear. The current trans-
mission gear will be displayed in the instrument
cluster. In AutoStick mode, you can use the
gear selector (in the MANUAL position), or the
shift paddles, to manually shift the transmis-
sion. Tapping the gear selector forward (-) while
in the MANUAL (M) position, or tapping the
(-) shift paddle on the steering wheel, will
downshift the transmission to the next lower
gear. Tapping the gear selector rearward (+) (or
tapping the (+) shift paddle) will command an
upshift.
NOTE:
The shift paddles may be disabled (or re-
enabled, as desired) using the Uconnect Per-
sonal Settings.
To disengage AutoStick, return the gear selec-
tor to the DRIVE position, or press and hold the
(+) shift paddle (if the shift lever is already in
DRIVE) until “D” is once again indicated in the
instrument cluster. You can shift in or out of
AutoStick at any time without taking your foot
off the accelerator pedal.
The shift paddles can also be disabled (or
re-enabled, as desired) using the Uconnect
Personal Settings.
For further information and applicable warnings
and cautions, please refer to your Owner’s Infor-
mation at www.jeep.com/en/owners/manuals/.
ECO Mode
• The Fuel Economy (ECO) mode can improve
the vehicle’s overall fuel economy during
normal driving conditions.
• Base Vehicles: Press the ECO switch in the
center stack of the instrument panel to turn
the system off. An amber light on the switch
will indicate that ECO mode is disengaged.
Press the ECO switch in the center stack of
the instrument panel a second time to turn
ECO mode back on.
• SRT Vehicles: Press the ECO switch in the
center stack of the instrument panel to turn
the system on. An amber light on the switch
will indicate that ECO mode is engaged.
Press the ECO switch in the center stack of
the instrument panel a second time to turn
ECO mode back off.
Shift Paddles